This page is helping for our customers, In this session which guide the Material Information, Measurement, Process of products.

Gloves Material

POLYURETHANE (PU):- Polyurethane provides excellent resistance to abrasion and tears. This material also offers exceptional flexibility and comfort, and is an extremely versatile material (used on the soles of most work boots) featuring excellent durability. PU coated machine knitted gloves are quickly becoming the gloves of choice for many applications. Main Feature is Exceptionally Comfortable.

PVC:- PVC is a synthetic thermoplastic polymer that provides excellent economical resistance to many oils and chemicals. Also provides good abrasion resistance. It is often used in low grade gloves. Not recommended for handling ketenes and any other types of solvents. Main Feature: Economical Chemical Resistance.

LATEX (Natural Rubber):- The the most elastic substance known. It provides outstanding grip, excellent resistance to abrasion, cuts and tears, yet is very flexible and comfortable to wear. Natural Rubber is a hydrocarbon and degrades when in contact with hydrocarbon fluids such as kerosene and petrol. Not recommended for handling oils, grease or petroleum solvents. Our Latex gloves are mostly USFDA compliant. Main Feature is Outstanding Grip.

NITRILE (Synthetic Rubber):- Is a synthetic rubber that provides excellent protection against hazardous chemicals, solvents, oils and animal fats. It also provides excellent resistance to abrasion, snags, punctures and cuts. Nitrile gloves have better abrasion and cut resistance than Natural Rubber and PVC gloves. Our Nitrile gloves are USFDA compliant. Main Feature is Extremely Durable.

NEOPRENE:- Developed by DuPont® as an oil resistant substitute for Natural Rubber. Neoprene is resistant to a very broad range of oils, acids, caustics and solvents, but is less resistant to cuts, punctures and abrasion than Natural Rubber or Nitrile. Main Feature is Oil Resistance.

BUTYL:- Butyl rubber provides excellent resistance to highly corrosive acids and is excellent for handling ketones and esters. The synthetic rubber also provides the highest permeation resistance to gases and water vapours. Butyl does not offer the physical strength of Natural Rubber. Main Feature is Outstanding Chemical Resistance.

COWHIDE LEATHER:- The outer most layer of the hide (where the hair once used to be). This layer of leather has been tanned with the smooth surface visible. It has good strength, abrasion resistance, and is very supple. Cowhide is the highest quality leather available. Main Feature is Durable.
 

SPLIT COWHIDE LEATHER:- Flesh side of the skin, making it a more economical leather. It has excellent strength and abrasion resistance, but is sometimes less flexible. Main Feature is Durable.

Gloves Size

The size is defined in the Standard EN420 as the hand circumference as measured around the palm at a point 20mm above the crotch of the thumb but excluding the thumb. The size is expressed in inches. Many gloves do not comply with the standard sizing. In these cases or if the size is shown as “S, M, L” the size marking should be used as an indicator only. All gloves with the EN standard comply with standard sizing.

The size is defined in the Standard EN420 as the hand circumference as measured around the palm at a point 20mm above the crotch of the thumb but excluding the thumb. The size is expressed in inches.

Many gloves do not comply with the standard sizing. In these cases or if the size is shown as “S, M, L” the size marking should be used as an indicator only. All gloves with the EN standard comply with standard sizing.

Shirts Material

The majority of T-shirts / Polo Shirt are made of 100% cotton, polyester, or a cotton/polyester blend. Environmentally conscious manufacturers may use organically grown cotton and natural dyes. Stretchable T-shirts / Polo Shirt are made of knit fabrics, especially jerseys, rib knits, and interlock rib knits, which consist of two ribbed fabrics that are joined together. Jerseys are most frequently used since they are versatile, comfortable, and relatively inexpensive. They also are a popular material for applying screen prints and heat transfers. Some jerseys come in tubular form, simplifying the production process by reducing the number of seams. Rib knit fabrics are often used when a snugger fit is desired. Many higher quality T-shirts / Polo Shirt are made of durable interlock rib knit fabrics.

Neckbands add support to the garment and give the neckline of the T-shirts / Polo Shirt a more finished look. Neckbands are generally one-by-one inch rib knits, although heavier fabrics or higher quality T-shirts may require two-by-two rib knits. Neckband fabrics may be tube rib knits of specific widths, or flat fabric that must be seamed. Additional T-shirt materials include tape or seam binding, made of a twill or another stiff fabric. Binding reinforces the neckline and shoulder seams and by covering the seams, it protects them from ripping apart under tension. Alternatively, elastic may be used at the shoulder seams so they remain flexible.

Shirts Size

Turn your inside out and wash in cold water on the gentle setting with detergent and fabric softener. HANG DRY! Do not put them in the dryer, because they will shrink and fade quickly.

Manufacturing Process

Making Gloves, Shirts and Trousers is a fairly simple and largely automated process. Specially designed machines integrate cutting, assembling, and stitching for the most efficient operations. The most commonly used seams for T-shirts are narrow, superimposed seams, which are usually made by placing one piece of fabric onto another and lining up the seam edges. These seams are frequently stitched with an over-edge stitch, which requires one needle thread from above and two looped threads from below. This particular seam and stitch combination results in a flexible finished seam.

Styling:- Style is designed and the dimensions are transferred to patterns. Adjustments are made for size differences and stylistic preferences.

Cutting:- The sections are cut to the dimensions of the patterns. The pieces consist of a hand sizes and body sizes, or separate front and back sections.

Assembling the front and back:- The separate pieces for the front and back sections must be stitched together at the sides. They are joined at the seam lines to form a simple, narrow, superimposed seam and stitched together using an overedge stitch. Care must be taken to avoid a needle cutting the yarn of the fabric, which can lead to tears in the garment.

Assembling the sleeves:- The hems of sleeves are generally finished before they are fitted into the garment, since it is easier to hem the fabric while it is flat. An automated system moves the sleeves to the sewing head by conveyor. The edge may be finished by folding it over, forming the hem and stitching, or by applying a band. The band may be attached as a superimposed seam or folded over the edge as binding.

Stitching the hem:- The garment hem is commonly sewn with an overedge stitch, resulting in a flexible hem. The tension of the stitch should be loose enough to allow stretching the garment without tearing the fabric. Alternative hem styles include a combination of edge finishing stitches.

Stitching the shoulder seams:- Generally, shoulder seams require a simple superimposed seam. Higher quality shirts manufacturers may reinforce seams with tape or elastic. Depending on the style of the shirts, the seams at the shoulder may be completed before or after the neckband is attached. For instance, if a tubular neckband is to be applied, the shoulder seams must first be closed.

Attaching the neckband:- For crew neck shirts, the neck edge should be slightly shorter in circumference than the outer edge where it is attached to the garment. Thus, the neckband must be stretched just the right amount to prevent bulging. Tubular neckbands are applied manually. The bands are folded, wrong sides together, stretched slightly, and aligned with the neckline. The superimposed seam is stitched with an overedge stitch.

Finishing the neckline:- Necklines with superimposed seams may be taped, so that the shirt is stronger and more comfortable. Tape may be extended across the back and over the shoulder seams to reinforce this area as well and to flatten the seam. The seam is then cover stitched or top stitched.

Label & Tags:- One or more labels and tags are attached. Labels and tags provide information about the manufacturer, size, fabric content, washing instructions and etc..

Finishing operations:- Packaging depends on the customer requirement and also the nature of product, mean while we provide a standard packaging that include one item in clear plastic bags.

Or

All Products in a one piece Plastic bag and 100 piece of Pack or Pair of Gloves, Shirts and Trousers are folded and packaged in pre-printed bags, usually of clear plastic and brand tags, that required on as per customer demands.